Sony NW-S4 Service Manual page 7
Portable ic audio player
Hide thumbs
Also See for NW-S4:
- Operating instructions manual (24 pages) ,
- Specifications (2 pages) ,
- Supplementary manual (2 pages)
Table of Contents
Advertisement
Work procedure
1.
Execution of Play Info Initialize
If the MAIN board was replaced for repair, execute "Play Info Initialize" in block qd to return respective functions to initial positions (see
Table 1-5).
Note: In executing the "Play Info Initialize", set the slide switches to the following positions.
AVLS switch ..... NORM
HOLD switch .... OFF
Table 1-5.
Function
Play position
Head of first music
VOL level
MEGA BASS
PLAY MODE
2.
Check after Work
(1) After work, check that the set operates normally through the operation in 1-3. "Operation Check for Inspection (Test Mode)" (see page
3).
(2) Make sure that the check-out and check-in can be made using the PC applications "OpenMG Jukebox" (CODEC programs "MP3" and
"ATRAC3") and "Windows Media Player 7" (CODEC program "WMA"). Also, make sure that the checked out data can be played
normally.
Note: Do not start up the "OpenMG Jukebox" and the "Windows Media Player 7" simultaneously.
(3) For an installation and acquisition method of "Windows Media Player 7" (CODEC program "WMA"), refer to the following instruction.
Using Network Walkman in
combination with Windows
TM
Media
Player 7
If you install Microsoft Windows Media
you can transfer a WMA file to your Network
Walkman and play it back. Refer to the online help for
Windows Media Player 7 for detailed operations.
Playing back WMA files with Network
Walkman
Installing Windows Media Player 7 and the
dedicated plug-ins
• Refer to http://www.openmg.com/ for the details
on how to obtain Windows Media Player 7.
• To use Windows Media Player 7 in combination
with your Network Walkman, you need to install
the dedicated plug-in software. This software has
been already installed when the NW-S4 driver was
installed using the enclosed OpenMG Jukebox CD-
ROM.
Transferring (copying) a WMA file to your
Network Walkman
Network Walkman can only playback those WMA
files that are listed in the "Available File Formats" in
the "Options" dialog box on Windows Media Player 7
and are of 64 to 160 kbps.
Notes
• If you check "Enable Personal Rights Management" on
the "CD Audio" tab in the "Options" dialog box when
recording a CD using Windows Media Player 7, the
music cannot be transferred to Network Walkman. To
enable the music transfer, remove the check mark when
recording the CD.
• It may be impossible to transfer the music contents
with copyright management information such as those
purchased via EMD.
16
Position
25
OFF
OFF
TM
Player 7,
1
Notes
Start Windows Media Player 7 and click on the
• Songs checked-out
"Portable Device" tab.
using the OpenMG
The "Portable Device" screen appears.
Jukebox (ATRAC3
and MP3) can also be
Copy Music button
listened on the
Portable Device
screen of Windows
Media Player 7, but
they can not be played
back nor checked-in to
Windows Media
Player 7.
Portable
• The transferred
Device tab
(copied) WMA files to
Network Walkman
from Windows Media
Player 7 are shown on
the OpenMG Jukebox
2
Connect your Network Walkman to the computer
with a ( ) mark and
(See page 9).
you can not playback
nor check-in them to
The computer recognizes your Network Walkman and
the OpenMG Jukebox.
the songs downloaded in Network Walkman are
shown on the "Music On Device" window of Windows
Media Player 7. If the computer can not recognize
your Network Walkman, press the F5 key.
3
Transfer (copy) the songs to your Network
Walkman.
Select a WMA file you want to transfer (copy) to your
Network Walkman and click on the "Copy Music"
button on Windows Media Player 7 window.
This starts copying the selected song and its title is
added to the "Music On Device" window.
Refer to the online help of Windows Media Player 7
for details on copying music to a portable device.
NW-S4
Portable
Device
screen
17
7
Advertisement
Table of Contents
