Miele DA 3160 EXT Operating And Installation Instructions page 26

Miele ventilation hood user manual

Hide thumbs Also See for DA 3160 EXT:

Table of Contents

Installation

^ Screw the brackets onto the right and

left inside walls of the housing unit as

shown. The back edge of the

brackets should align with the vertical

line drawn up from the front of the

spacer strip, and the lower edge

aligned with the lower edge of the

housing unit side wall.

The brackets are designed for 16

and 19 mm thick carcase sides.

Orientate the bracket so that the

vertical depth matches the thickness

of the panel, as shown.

^ Place the appliance on its back.

Do not remove the protective film

between the deflector plate and the

casing until the hood has been

placed in the housing unit.

^ Hold the grease filter firmly, and pull

it out with the deflector plate as

shown.

^ Remove the grease filter and place to

one side.

^ Push the deflector plate back in.

Table of Contents

Show Quick Links

Table of Contents

Da 3190 ext Da 3160 Da 3180 Da 3190 Da 2250 ext