Table of Contents
Advertisement
Cappuccinatore
Heating milk in the cappuccinatore
^ Fill the cappuccinatore to the upper
"Max" mark with cold milk, place the
lid on, pull the spout out from the lid.
^ Turn the valve all the way to the left
for heating.
^ Place the cappuccinatore under the
steam valve.
^ Slowly press the steam lever down
and carefully "connect" the valve to
the cappuccinatore.
Quick cleaning
For a quick cleaning between froths the
cappuccinatore lid can be rinsed with
the steam valve.
The rinsing does not replace the
cleaning of the cappuccinatore in a
dishwasher.
^ Turn the left jog shuttle on the coffee
machine to "Rinse".
^ Push the cappuccinatore spout into
the "in" position and place an empty
cup underneath the cappuccinatore
spout.
^ Press the steam lever down.
The process will stop automatically
when the lid is rinsed.
4
Complete Cleaning
Thorough cleaning is very important to
prevent the cappuccinatore spout from
becoming blocked and producing little
or no froth. For best results, use a
dishwasher - all parts are
dishwasher-safe.
^ Separate the lid, remove all parts and
clean.
^ Re-assemble the lid as shown in the
illustration. For the valve to work
properly, the dot on the valve must
face the upper right.
Be sure that the parts are assembled
properly.
Advertisement
Table of Contents
