Table of Contents
Advertisement
9.3 GLP-compliant print
At calibration, the AJH-CE Series enables printing in a format compliant with GLP. Set the function to
the GLP print support ([EL u.L P
I]) side, then connect the balance to a printer or other equipment.
When calibration is complete, the balance prints out the format illustrated below.
Since only items are printed, the data should be entered manually by the person who conducted
calibration.
^Reference: "4.2
Description of Functions" (Page 13)
"9.2 Calibration of AJH-CE Series" (Page 29)
GLP-Compliant Print Form
••CALIBRATION**
MODEL:
S/N:
ID:
DATE:
TIME:
*CAL. END
NAME:
***************
<- Title
«— Model of balance
< — Serial No. of balance
«- ID No.
« — Date of calibration
< — Time of calibration
« — End of calibration
• - Signature of person in charge
JKWhen the CSP-16(0) is connected for printing, set the dip switch No.3 ON (control by scale), and
No.7 OFF (manual printing off).
For more information on the printer, refer to the printer's operation manual.
Caution:
Printing is done only when calibration ends normally. The balance will not print if calibration ends
abnormally with [3 - E r r ], [S' - £ r r ], or [ 5 1 D P] being issued.
31
Advertisement
Table of Contents
