Page 1
KX-HGT100 SIP-Phone CONFIGURATIONS AND USER SETTINGS Panasonic Telephone Systems www.voicesonic.com Phone 877-289-2829 Panasonic KX-HGT100, KXHGT100, HGT100...
Page 2
KX-HGT100 Configuration (1) 1. Connect the HGT100 to the LAN via a suitable switch port 2. Power on the unit (using PoE or the optional AC Adaptor) Not Configured 3. Check the LCD Display shows “Not configured Web Setting Web Setting”...
Page 3
KX-HGT100 Configuration (2) Unit Status: Unit has no Profile set. Registration is not possible...
Page 4
KX-HGT100 Configuration (3) Network Status: STATIC IP is set by default Default IP: 192.168.0.241 Default Subnet Mask 255.255.255.0...
Page 5
KX-HGT100 Configuration (4) LAN Connection: STATIC IP or DHCP Mode can be selected. (Static IP is Default = X ) NB: If you select ‘DHCP’ here, you will need to re-connect your browser using the allocated IP address before continuing to configure.
Page 6
KX-HGT100 Configuration (5) Enter IP Address etc of HGT100 here DNS Server Address can be added here (not required for TDE/NCP) After clicking ‘Save’, please power off/on the HGT-100...
Page 7
KX-HGT100 Configuration (6) The allocated IP address can be checked by pressing the [i+] key on the HGT-100. To re-connect with a browser (after enabling DHCP), enter the allocated IP address) i.e. Allocated IP address 10.66.55.44 URL:http://10.66.55.44/ After clicking ‘Save’, power off/on the HGT-100.
Page 8
KX-HGT100 Configuration (7) Username and Password: Modifies the HTTP Login User name and Password from default If Idle Timeout expires, unit will need to be powered off/on to re-open HTTP port. (“Special” Setting)
Page 9
KX-HGT100 Configuration (8) Basic Settings: Refer to next slide for language parameters; SIP Extension details and password (Telephone Number and SIP ID can match) SIP Proxy, Registrar and Domain information. For NCP Extension, enter the IP address of the NCP...
Page 10
KX-HGT100 Configuration (9) Basic Settings: (Example) (Stand-Alone SIP Telephone configuration with Gamma SIP Account) SIP Number, Account and password. SIP Proxy, Registrar and Domain (IP or DNS).
Page 11
KX-HGT100 Configuration (11) Advanced Settings: RTP Port Range (Voice Traffic) Codec Priority: PCMA/U = G711A/U G726-32 (N/A for TDA/NCP) G729A DTMF Type: Inband/Outband(RFC2833) SIP UDP Control port Diffserv(ToS) field settings One Time Caller Code either Permits or Denies CLIP sending on a per call basis,...
Page 12
KX-HGT100 Configuration (14) Configuration File: Basic Configurations can be backed-up and/or loaded via this screen. This allows a dealer to create a profile template and then modify only a small number of parameters (Number/Password etc)
Page 13
KX-HGT100 Configuration (15) Upgrade Firmware: Firmware updates can be managed easily from this page. Power off/on the unit to complete the upgrade.
Page 14
KX-HGT100 Configuration (16) Unit Maintenance: Lan/PC Port. Speed/Duplex Settings; Auto Negotiate 100Mbps/Full Duplex 100Mbps/Half Duplex 10Mbps/Full Duplex 10Mbps/Half Duplex Auto Sense is supported.
Page 15
KX-HGT100 User Setting (1) ‘PROGRAM’ KEY ‘OK’ KEY LCD DISPLAY ‘INFORMATION’ KEY ‘NAVI’ KEY AUTO HOLD Message Transfer ‘SP-Phone ‘Key SP-Phone, Hold and Message Keys ‘MUTE’ KEY have LED. ‘REDIAL’ KEY...
Page 16
KX-HGT100 User Setting (2) Keys used: Select PROGRAM Save Speed Dial? Enter No. No. 1 [OK]=SET [OK]=YES 0123456789 Saved in No. 1 How to access :- Speed dial 0 ~ 9 AUTO ‘OFF-HOOK’...
Page 17
KX-HGT100 User Setting (3) Set Date + Time Enter Year 2008 Enter Month/Day [OK]=YES [OK] 05/07 [OK] ▲▼= AM/PM/24H Enter Time 17:30PM [OK] 17:30 [OK] My Caller ID Select (Show) [OK]=YES Show/Hide CLIR (Show/Hide)
Page 18
KX-HGT100 User Setting (4) LCD contrast ? - ██████ Select [OK]=YES [OK]=YES 4 STEPS Ringer Tone ? Ringer Tone ? Select Ring 1 [OK]=YES Ring [OK]=YES 3 STYLES Ringer Volume ? Ringer Volume [OK] Select Ring 1 [OK]=YES OFF - █████...
Page 19
KX-HGT100 User Setting (5) Set Hold Music ? Select (#01) [OK]=YES #11 Settings (Inc ‘OFF’) KeyTone Volume ? Keytone Volume Select [OK]=YES OFF - ███ + [OK] 3 Settings (Inc ‘OFF’) Time AM/PM 24H Select AM/PM/24H (AM) [OK]=YES...
Page 20
KX-HGT100 User Setting (6) Refer to Change Language ? Slide #14 Select English [OK] supported languages STATIC IP Set Network ? Select (STATIC) [OK]=YES DHCP Default GW [OK] Subnet Mask [OK] IP Address [OK] 192.168.000.001 255.255.255.0 192.168.010.003...
Page 21
KX-HGT100 User Setting (7) Select INFORMATION Own number Default Gateway 01234 192.168.000.001 Status Subnet Mask Normal 255.255.255.0 Network IP Address STATIC 192.168.010.003...
Page 22
KX-HGT100 ‘Special’ setting (1) ‘Special’ Settings: Factory Default: To return the unit to it’s factory default settings, press [Program] + [OK] + [Mute] and power-on the unit. If successful, “Not Configured Web Setting” will be displayed in the LCD. HTTP Port open: To re-open the HTTP Port after initial setting or Idle time-out (default 30min) [OK] + [Mute] and power-on the unit.