Toshiba GA-1330 Service Manual page 3

Hide thumbs Also See for GA-1330:
Table of Contents

Advertisement

General Precautions for Installation/Servicing/Maintenance
for the GA-1330
The installation and service should be done by a qualified service
technician.
1. When installing the GA-1330 to the Equipment, be sure to follow the instructions described in the
"Unpacking/Set-Up Procedure for the GA-1330" booklet which comes with each unit of the GA-
1330.
2. The GA-1330 should be installed by an authorized/qualified person.
3. Before starting installation, servicing or maintenance work, be sure to turn OFF and unplug the
equipment first.
4. When servicing or maintaining the GA-1330, be careful about the rotating or operation sections such
as gears, pulleys, sprockets, cams, belts, etc.
5. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
noted in this manual or other related materials. Be careful not to reassemble small parts such as
screws, washers, pins, E-rings, toothed washers to the wrong places.
6. Basically, the machine should not be operated with any parts removed or disassembled.
7. Delicate parts for preventing safety hazard problems (such as switches, sensors, etc. if any) should
be handled/installed/adjusted correctly.
8. Use suitable measuring instruments and tools.
9. During servicing or maintenance work, be sure to check the serial No. plate and other cautionary
labels (if any) to see if they are clean and firmly fixed. If not, take appropriate actions.
10.The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,
because the ICs on it may be damaged due to static electricity. Before using the wrist band, pull out
the power cord plug of the equipment and make sure that there is no uninsulated charged objects in
the vicinity.
11. For the recovery and disposal of used GA-1330, consumable parts and packing materials, follow the
relevant local regulations or rules.
12.After completing installation, servicing and maintenance of the GA-1330, return the GA-1330 to its
original state, and check operation.

Advertisement

Table of Contents
loading

Table of Contents