Sound Problems; Remote Control Problems; Channel Tuning Problems - Toshiba 65L7350U User Manual
Hide thumbs
Also See for 65L7350U:
- User manual (198 pages) ,
- Resource manual (2 pages) ,
- User manual (103 pages)
Table of Contents
Advertisement
176
Troubleshooting
Sound problem
Sound problems
Check the antenna/cable connections, see "Connecting a digital audio
system" on page 36.
The station may be having broadcast difficulties. Try another channel.
The sound may be muted. Press the VOL (+ -) buttons or MUTE button.
If you connect a computer using either the PC IN terminal or an HDMI
TM
terminal, snake sure that the Rear Shared Audio setting is properly set, see
"Connecting a digital audio system" on page 36.
Remote control p roblems
Remove all obstructions between the remote control and the TV.
Replace the remote control's batteries, see "Installing batteries" on page
48.
Your TV's remote control may not operate certain features on your
external device. Refer to the owner's manual for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control that
came with the device, see "Learning about the remote control" on page
51.
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure, see "Resetting to Factory Defaults" on page 103.
Channel t uningproblems
Ensure that the remote control is set to the correct device mode, see
"Learning about the remote control" on page 51.
The Auto Tuning feature may have erased the channel from lnelnory. To
add the channel to the channel lnelnory, see "Manual Tuning" on page
68.
The Lock feature may have blocked the channel. To unblock the channel,
see "Unlocking programs" on page 91.
If you cannot tune digital channels, check the antenna configuration, see
"Initial setup" on page 53. If the problem persists, clear all channels
from the channel list and reprogram channels into melnory, see "Storing
channels in memory (optional)" on page 67. For additional information,
see "TV stops responding to controls." on page 173. If the problem
persists, use the Reset Factory Defaults procedure, see "Resetting to
Factory Defaults" on page 103.
Advertisement
Table of Contents
