Full Size Tumble
Action
Washers
Before
beginning
installation,
carefully
read these instructions.
This will simplify
the
instaffation
and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation
for future reference.
NOTE: The electrical
service
to the washer
must conform
with
local codes and ordinances
and the latest
edition
of the National
Electrical
Code, ANSI/NFPA
70.
For your safety the information
in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
. Do not try to light any appliance.
. Do not touch any eIectrica[ switch; do not
use any phone in your building.
. Clear the room, building
or area of all
occupants.
. immediately
call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
. if you cannot reach your gas supplier, call
the fire department.
installation
and service must be performed
by a
qualified
installer,
service agency
or the gas
supplier.
Printed in U.S.A.
Contents
SUBJECT
PAGE
Preqnstallation Requirements
2
Electrical Requirements
2
Grounding Requirements
2
Water Supply Requirements
2
Drain Requirements
2
Roughqn Dimensions
3
Location Of Your Washer
4
Unpacking
4
Installation
5-6
Replacement Parts
6
P/N 134602900A (0512)