Flash memory multimedia av navigation receiver (188 pages)
Summary of Contents for Pioneer AVIC-Z1000D11-CHU
Page 1
Remove the two storage pockets They are attached with two pins Remove four screws using a T20 screwdriver Remove the original frame from the dashboard Keep them a side for later Pioneer installation manual - Fiat Ducato 8 - v1.03...
Page 2
Mount the left and right metal bracket to the Pioneer unit and plastic trim ! Steps 7 to 18 are only for AVIC-Z1000D11-CHU kits with a head up display ! Remove two screws at the bottom of Remove the tacho visor...
Page 3
(pos. 4 & 5) Slide the cables back into the main housing Connect back to the tacho and to the interface and secure with new cable tie or electric tape Pioneer installation manual - Fiat Ducato 8 - v1.03...
Page 4
Locate the green and black connector and the steering column remove them Open the green connector and Connect the violet/white cable (reverse signal) slide the cables out to the white/blue cable in pin seventeen. Pioneer installation manual - Fiat Ducato 8 - v1.03...
Page 5
Insert the pink cable pin (speedpulse) slide the cables out to the open position twenty-two (22) ! Steps 25 & 26 are only for AVIC-Z1000D12-C & AVIC-Z1000D11-CHU kits ! Connect the main harness DO NOT USE THE ORANGE CONNECTOR Make sure to use the GREY connector...
Page 6
Connect the rotary command and slide Secure with small screw in it upwards into the panel the opening on the side Put the plastic cover over in the screw opening Final result Pioneer installation manual - Fiat Ducato 8 - v1.03...