Summary of Contents for Philips CitySpirit Street BDS480
Page 1
BDS482 LED35/WW 220-240V BL AUS BDS482 LED35/WW 220-240V RD AUS *:Dimming by program in IC inside power supply. 50mm *Pole diameter 60mm Unit: mm 单位: mm Philips Lighting (China) Investment Co., Ltd. No. 9, Lane 888 Tianlin Rd, Shanghai, China Pos talcode: 200233...
Page 2
Pole Mounting 16Nm 1.Put luminaire on the top of pole and diameter of pole is 60mm at junction; 2.Use hexagon socket screw key to tighten two screws, torque is 16 N.m. Driver Maintenance 或 1. Open clip; 2. loosen screws at input end of power supply; 3.
Page 3
Glass Maintenance 1.Glass maintenance is only for non-color ring version, color ring version should be maintained in factory; 2.Use 3mm hexagon socket screw key to loosen fives screws to fix glass; 3.Take off damaged glass; 4.Replace good glass with damaged glass, don t forget plastics washer and sealing ring, then tighten screws.
Page 4
NOTES: 1.The luminaire should be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements. 2.Do not switch on before complete installation. 3.Don't hot swap. Don't operate when power on; Don't touch the lamp or the heating part, etc. 4.First switch off main supply and then replace broken glass.